How to Prevent and Repair Water Damage Stamford CT


Continual contact with water is often the primary reason why you will find water damage in your brickwork. Defective rainwater systems are one common reason you will find your walls under continuous attack from the elements. Probably the most preventable problems homeowners will face, I am still shocked even today considering the variety of water drainage systems left worn out. If however, you do find that you’re suffering from damaged brickwork, here are top tips to help repair the problem if you think handy having a trowel.

The continual exposure to moisture within the cement involving the brickwork may cause it to melt, from the outside in, therefore the first thing to do is rake the cement from in between all your brickwork, about 15mm deep, or before you start hitting solid cement again, being careful to not damage your bricks.

Water Damage Stamford CT should be cleaned once you’ve finished raking out the soft cement and then having a clean pointing trowel you can start to complete the joints.

Water Damage Stamford CT or vertical joints first, and then fill in your bed or horizontal joints, finally running the repair slightly within the affected are so regarding blending it into the older brickwork.

Once the brickwork is water damaged the affected bricks should be carefully removed and replaced, being careful to complement the existing brickwork. It is always important to note at this stage that the brick that has been spoiled around the showing face can frequently be great on its remaining face. If carefully removed in one piece it may be turned around to show the unaffected side. This will be the best match for your existing masonry. After taking out the problematic bricks, the opening should be brushed clean of any loose sand and a new bed joint is to be laid making sure that the joint is full.

Water Damage Stamford CT joint in your replacement brickwork is the most important. This is the joint that’ll be directly underpinning the existing brickwork which should be compacted using a bit of hardwood the same thickness as the joints. This is employed for ramming the mortar towards the back of the new joints. Care should be taken the replacement bricks are bedded in line with existing face work to ensure continuity and an inconspicuous repair.

When it comes to cracking in your walls, if you only have cracks following the pointing of the brickwork usually this is not such a big job to have repaired, if however, your cracks follow on through the bricks then those bricks will need replacing, as well as work being carried out to discover and repair the main from the replaced were the horizontal cracking has occurred it is a simple repainting job has described.

It’s understandable that before you attempt these repairs you must take care of any remedial work first, checking also to see potential future problems and addressing them accordingly.